Panamax M4300 MAX 4300 7 Outlet Line Conditioner/Surge Suppressor Rack Mountable

Description

General Information
Manufacturer
Panamax
Manufacturer Part Number
M4300
Product Name
MAX® 4300
Marketing Information
Panamax M4300 DBS Line Conditioner/Surge Suppressor, State-of-the-art noise filtration and power protection for audio/video systems; 7 AC outlets; Always On Outlets 3; Switched Outlets 4; Gold coax connectors; RFI/EMI noise filtration; Automatically turns off power to your equipment when AC voltage exceeds 133 volts or drops below 90 volts; Auto reset; Cord Length 10 ft.; Plug Type Straight; Length 7.31"; Width 17.14"; Height 1.94"; Weight 5.87 lbs.
PanaMax 4300 is a state of the art noise filtration and power protection system. AC outlets are fed through a Balanced "L" filtration circuit to eliminate EMI/RFI noise on all three power paths (L-N, L-G and N-G) so even equipment with 2-blade plugs receive clean uncontaminated power.
SurgeGate Plus Circuitry, the power monitoring system acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over- or undervoltage condition and disconnects the power to equipment, then reconnects it when the power returns to a safe level. SignalPerfect Technology provides optimized, application specific protection against signal line surges.
Features
State of the Art Filtration System
AC outlets are fed through a Balanced "L” filtration circuit to eliminate EMI/RFI noise on all three power paths (L-N,L-G&N-G) so even equipment with 2-blade plugs receive clean uncontaminated power.
SurgeGate Plus Circuitry
A Power monitoring system that acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over or undervoltage condition and disconnects the power to equipment, then reconnects it when the power returns to a safe level. automatically detects a prolonged over or undervoltage condition and disconnects the power to equipment, then reconnects it when the
SignalPerfect Technology
For 2 coaxial (1 satellite TV & 1 off-air/cable TV) lines and 1 pay-per-view telephone line provides optimized, application specific protection against signal line surges.
Protect or Disconnect Technology
Protection circuitry for catastrophic surges.
Convenience Features
DC Voltage trigger input for initiating a start-up/shut-down sequence. LED Voltmeter indicates line voltage
Specifications
AC SPECIFICATIONS
Single Pulse Energy Dissipation  1650 Joules
Spike Capacity 52,000A
EMI/RFI Noise Filtration 50dB (99.7%)
Line Voltage 120VAC, 50/60 Hz
Clamping Level 330V
Initial Clamping Level 141V RMS/200V Peak
Protection Modes L-N, N-G, L-G
Maximum Current Rating 15A (1800W)
Response Time <1ns
TELCO SPECIFICATIONS
Clamping Level 260v
Capacitance 50pf (approx.)
Suppression Modes Metallic & Longitudinal
Wires Protected 1 pair, (4,5)
Connectors RJ-11/45
COAX SPECIFICATIONS
Antenna/Cable Lines Protected 1
Antenna/Cable Clamping 0.7v
Antenna/Cable Attenuation <1dB
Satellite Lines Protected 1
Satellite Clamping 27v
Satellite Attenuation <1dB